|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Integrated Circuit Systems, Inc. Product Brief M630 VOLTAGE CONTROLLED SAW OSCILLATOR PIN ASSIGNMENT (1.6 x 1.8 inch SMA) M 630 G lass F eed Thru VT GND G lass F eed T hru VCC GENERAL DESCRIPTION The M630 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) based oscillator and filters deliver output with exceptionally low phase jitter. The M630 is available in a selection of center frequencies in the 10GHz range. The M630 is suitable for phase-locked loop implementations, clock and data recovery circuits, and other timing applications for the telecom and optical fiber networking markets (OC-192/STM-64 with and without Forward Error Correction - FEC). Vt GND Vcc SM A C onnector RF RF FEATURES * VCSO center frequencies from 9.953 to 12.249 GHz * * * (Specify center frequency at time of order) Low phase noise -65dBc/Hz @ 1kHz offset Single 6.5V power supply Small 1.6 x 1.8 inch SMA connector package Sample of Available Output Frequencies VCSO Center Frequency1 (GHz) 9.953 GHz 10.664 GHz 12.249 GHz Applications OC-192 OC-192, OTU2 FEC OC-192 FEC 1. Specify VCSO center frequency at time of order BLOCK DIAGRAM M630 SAW Delay Line Phase Shifter 2x Frequency Multiplier Bandpass Filter 4x Frequency Multiplier Bandpass Filter RF_OUT RF Amp VT M630 Rev 1.1 M630 Voltage Controlled SAW Oscillator Revised 14Nov2003 Integrated Circuit Systems, Inc. Communications Modules w w w. i c s t . c o m tel (508) 852-5400 |
Price & Availability of M630 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |